產品目錄
- 廠家安規檢測儀器/設備
- 摩擦系數測試儀/防滑測試儀
- 德國GTE測力儀
- 德國FEMTO電流/電壓/鎖相/...
- 美國DL放大器
- 博納德BND自研激光類產品
- 美國Coherent功率計
- 加拿大gentec-eo功率能量...
- 美國Pacific Lasert...
- 德國Lampert設備
- 德國HHB測量儀
- 美國DEI/美國BNC脈沖發生器
- 美國SRS儀器
- 德國PTL儀器設備
- 英國SCITEC儀器
- 英國RS儀器
- 廠家量規/通止規/試驗裝置等
- 日本Minebea傳感器
- 美國ESI
產品詳情
簡單介紹：
美國DL放大器中國代理商
詳情介紹：
The Model 1211 Current Preamplifier was designed to provide all of the features
required of a modern laboratory preamplifier. It measures current with full scale
sensitivity ranging from 10-2 to 10-12
amperes. With a dynamic range of 96dB and
output stability better than 0.003% per o C or per day plus a gain stability of 0.05%
per o C of per day, its performance is unexcelled.
The classic analog design provides a clean signal without the high frequency “hash”
encountered with microprocessor based designs employing multiplexed front panes
displays. The wide gain bandwidth product permits calibrated, front panel rise time
settings from 10?sec to 1 second.
The 1211 has a 600? output, a 50? output and a zero ? unity gain (converter)
output. It may be gated off and on by a TTL Level Pulse at a rear panel connector at
a rate up to 5 kHz for input overload suppression, etc.
Other convenience features include a 0-5 volt adjustable detector bias supply with
100ppm per o C stability and calibrated current suppression of 10-3 to 10-10
amperes in 8 ranges.
The unit may be battery operated with the addition of the Option 10 Battery Pack.
This allows the unit to run on batteries only, line power only, or while recharging
from the line. Fast charge and trickle charge rates are switch selectable. External
battery modification option M104 is also available so customer may use their own
required of a modern laboratory preamplifier. It measures current with full scale
sensitivity ranging from 10-2 to 10-12
amperes. With a dynamic range of 96dB and
output stability better than 0.003% per o C or per day plus a gain stability of 0.05%
per o C of per day, its performance is unexcelled.
The classic analog design provides a clean signal without the high frequency “hash”
encountered with microprocessor based designs employing multiplexed front panes
displays. The wide gain bandwidth product permits calibrated, front panel rise time
settings from 10?sec to 1 second.
The 1211 has a 600? output, a 50? output and a zero ? unity gain (converter)
output. It may be gated off and on by a TTL Level Pulse at a rear panel connector at
a rate up to 5 kHz for input overload suppression, etc.
Other convenience features include a 0-5 volt adjustable detector bias supply with
100ppm per o C stability and calibrated current suppression of 10-3 to 10-10
amperes in 8 ranges.
The unit may be battery operated with the addition of the Option 10 Battery Pack.
This allows the unit to run on batteries only, line power only, or while recharging
from the line. Fast charge and trickle charge rates are switch selectable. External
battery modification option M104 is also available so customer may use their own
DC power supply to power the unit.
